مجموعة تكنولاب البهاء جروب

تحاليل وتنقية ومعالجة المياه
 
الرئيسيةالبوابةمكتبة الصورس .و .جبحـثالأعضاءالمجموعاتالتسجيلدخول
تنظيف وتطهير وغسيل واعادة تاهيل الخزانات


معمل تكنولاب البهاء جروب
 للتحاليل الكيميائية والطبية
والتشخيص بالنظائر المشعة
 للمخدرات والهرمونات والسموم
 وتحاليل المياه

مجموعة
تكنولاب البهاء جروب
لتصميم محطات الصرف الصناعى والصحى
لمعالجة مياه الصرف الصناعى والصحى
مجموعة تكنولاب البهاء جروب
المكتب الاستشارى العلمى
دراسات علمية كيميائية



معالجة الغلايات وانظمة البخار المكثف
معالجة ابراج التبريد المفتوحة
معالجة الشيللرات
مجموعة تكنولاب البهاء جروب
اسنشاريين
كيميائيين/طبيين/بكترولوجيين
عقيد دكتور
بهاء بدر الدين محمود
رئيس مجلس الادارة
استشاريون متخصصون فى مجال تحاليل وتنقية ومعالجة المياه
متخصصون فى تصنيع وتصميم كيماويات
معالجة الصرف الصناعى والصحى
حسب كل مشكلة كل على حدة
تصنيع وتحضير كيماويات معالجة المياه الصناعية
مؤتمرات/اجتماعات/محاضرات/فريق عمل متميز
صور من وحدات معالجة المياه


technolab el-bahaa group
TECHNOLAB EL-BAHAA GROUP
EGYPT
FOR
WATER
TREATMENT/PURIFICATION/ANALYSIS
CONSULTANTS
CHEMIST/PHYSICS/MICROBIOLIGIST
 
INDUSTRIAL WATER
WASTE WATER
DRINKING WATER
TANKS CLEANING
 
CHAIRMAN
COLONEL.DR
BAHAA BADR EL-DIN
0117156569
0129834104
0163793775
0174041455

 

 

 

تصميم وانشاء محطات صرف صناعى/waste water treatment plant design

technolab el-bahaa group
egypt
We are a consultants in water treatment with our chemicals as:-
Boiler water treatment chemicals
Condensated steam treatment chemicals
Oxygen scavenger treatment chemicals
Ph-adjustment treatment chemicals
Antiscale treatment chemicals
Anticorrosion treatment chemicals
Open cooling tower treatment chemicals
Chillers treatment chemicals
Waste water treatment chemicals
Drinking water purification chemicals
Swimming pool treatment chemicals
Fuel oil improver(mazote/solar/benzene)
technolab el-bahaa group
egypt
We are consultants in extraction ,analysis and trading the raw materials of mines as:-
Rock phosphate
32%-30%-28%-25%
Kaolin
Quartez-silica
Talcum
Feldspae(potash-sodumic)
Silica sand
Silica fume
Iron oxid ore
Manganese oxid
Cement(42.5%-32.5%)
Ferro manganese
Ferro manganese high carbon

 

water treatment unit design


 

وكلاء لشركات تركية وصينية لتوريد وتركيب وصيانة الغلايات وملحقاتها
solo agent for turkish and chinese companies for boiler production/manufacture/maintance

 

وكلاء لشركات تركية وصينية واوروبية لتصنيع وتركيب وصيانة ابراج التبريد المفتوحة

 

تصميم وتوريد وتركيب الشيللرات
design/production/maintance
chillers
ابراج التبريد المفتوحة
مجموعة تكنولاب البهاء جروب
المكتب الاستشارى العلمى
قطاع توريد خطوط انتاج المصانع
 
نحن طريقك لاختيار افضل خطوط الانتاج لمصنعكم
سابقة خبرتنا فى اختيار خطوط الانتاج لعملاؤنا
 
1)خطوط انتاج العصائر الطبيعية والمحفوظة والمربات
2)خطوط انتاج الزيوت الطبيعية والمحفوظة
3)خطوط انتاج اللبن الطبيعى والمحفوظ والمبستر والمجفف والبودرة
4)خطوط تعليب وتغليف الفاكهة والخضروات
5)خطوط انتاج المواسير البلاستيك والبى فى سى والبولى ايثيلين
6)خطوط انتاج التراى كالسيوم فوسفات والحبر الاسود
7)خطوط انتاج الاسفلت بانواعه
Coolمحطات معالجة الصرف الصناعى والصحى بالطرق البيولوجية والكيميائية
9)محطات معالجة وتنقية مياه الشرب
10)محطات ازالة ملوحة البحار لاستخدامها فى الشرب والرى
11)الغلايات وخطوط انتاج البخار الساخن المكثف
12)الشيللرات وابراج التبريد المفتوحة وخطوط انتاج البخار البارد المكثف
 
للاستعلام
مجموعة تكنولاب البهاء جروب
0117156569
0129834104
0163793775
 
القاهرة-شارع صلاح سالم-عمارات العبور-عمارة 17 ب
فلا تر رملية/كربونية/زلطيه/حديدية

وحدات سوفتنر لازالة عسر المياه

مواصفات مياه الشرب
Drinking water
acceptable
values

50

colour

acceptable

Taste

nil

Odour

6.5-9.2

ph

 

1 mg/dl

pb

5 mg/dl

as

50 mg/dl

cn

10 mg/dl

cd

0-100mg/dl

hg

8 mg/dl

f

45 mg/dl

N02

1 mg/dl

Fe

5 mg/dl

Mn

5.1 mg/dl

Cu

200 mg/dl

Ca

150 mg/dl

Mg

600 mg/dl

Cl

400 mg/dl

S04

200 mg/dl

Phenol

15 mg/dl

zn

 

 

الحدود المسموح به
ا لملوثات الصرف الصناعى
 بعد المعالجة
Acceptable
values
treated wate water
7-9.5

ph

25-37 c

Temp

40 mg/dl

Suspended solid

35 mg/dl

bod

3 mg/dl

Oil & grase

0.1 mg/dl

hg

0.02 mg/dl

cd

0.1 mg/dl

cn

0.5mg/dl

phenol

1.5 ds/m

conductivity

200 mg/dl

na

120 mg/dl

ca

56 mg/dl

mg

30 mg/dl

k

200 mg/dl

cl

150 mg/dl

S02

0.75 mg/dl

Fe

0.2 mg/dl

Zn

0.5 mg/dl

Cu

0.03 mg/dl

Ni

0.09 mg/dl

Cr

0.53 mg/dl

لb

0.15 mg/dl

pb

 





pipe flocculator+daf
plug flow flocculator
lamella settels

محطات تحلية مياه البحر بطريقة التقطير الومضى على مراحل
MSF+3.jpg (image)
محطات التقطير الومضى لتحلية مياه البحر2[MSF+3.jpg]
some of types of tanks we services
انواع الخزانات التى يتم تنظيفها
ASME Specification Tanks
Fuel Tanks
Storage Tanks
Custom Tanks
Plastic Tanks
Tank Cleaning Equipment
Double Wall Tanks
Septic Tanks
Water Storage Tanks
Fiberglass Reinforced Plastic Tanks
Stainless Steel Tanks
Custom / Septic
مراحل المعالجة الاولية والثانوية والمتقدمة للصرف الصناعى

صور مختلفة
من وحدات وخزانات معالجة الصرف الصناعى
 التى تم تصميمها وتركيبها من قبل المجموعة

صور
 من خزانات الترسيب الكيميائى والفيزيائى
 لوحدات معالجة الصرف الصناعى
المصممة من قبل المحموعة



technolab el-bahaa group


technolab el-bahaa group


technolab el-bahaa group

technolab el-bahaa group


technolab el-bahaa group


technolab el-bahaa group


technolab el-bahaa group


technolab el-bahaa group


technolab el-bahaa group


technolab el-bahaa group




مياه رادياتير اخضر اللون
بريستول تو ايه
انتاج شركة بريستول تو ايه - دمياط الجديدة
مجموعة تكنولاب البهاء جروب

اسطمبات عبوات منتجات شركة بريستول تو ايه-دمياط الجديدة

مياه رادياتير خضراء فوسفورية

من انتاج شركة بريستول تو ايه 

بترخيص من مجموعة تكنولاب البهاء جروب


زيت فرامل وباكم

DOT3



شاطر | 
 

 جهاز قياس الخواص الطبيعية للمياه الثابت والمحمول1

استعرض الموضوع السابق استعرض الموضوع التالي اذهب الى الأسفل 
كاتب الموضوعرسالة
Admin
Admin
avatar

عدد المساهمات : 3567
تاريخ التسجيل : 15/09/2009
العمر : 49
الموقع : مصر

مُساهمةموضوع: جهاز قياس الخواص الطبيعية للمياه الثابت والمحمول1   الجمعة يناير 07, 2011 3:50 pm

Multiparameter Bench Meters

The instrument is a state of the art, professional bench meter with a graphic LCD, designed to provide accurate laboratory results.

This instrument can also measure with ORP electrodes (pH channel input), thanks to their capability to measure mV with a resolution up to 0.1 mV and with ISE electrodes on ppm scale (pH channel input).
The electrode type and unit selection capability and the ISE calibration in up to five calibration standard solutions make this instrument very useful for a large range of concentration solutions measurements.
Relative mV feature is available as well as measurement in resistivity, TDS and salinity on the EC channel.
Two input channels are available.
• Channel 1: pH/mV/ISE and temperature
• Channel 2: EC/TDS, NaCl/resistivity and temperature
pH channel:
• 7 standard pH buffers (pH 1.68, 4.01, 6.86, 7.01, 9.18, 10.01 and 12.45) for calibration
• Up to 5 point pH calibration
• Custom calibration with up to two custom buffers
• Messages on the graphic LCD for an easy and accurate calibration.
• Diagnostics to alert the user when the electrode needs cleaning
• User selectable “out of calibration range“ warning
• User selectable “calibration timeout“ to remind when a new calibration is necessary
• Extended temperature range on pH channel from –20 to 120 ºC (–4 to 248 ºF), using HI 7662-T temperature probe
EC channel:
• 7 memorized standards (0.00 μS/cm, 84.0 μS/cm, 1.413 mS/cm,
• 5.00 mS/cm, 12.88 mS/cm, 80.0 mS/cm and 111.8 mS/cm) for calibration
• EC calibration up to two calibration points
• Messages on the graphic LCD for an easy and accurate calibration
• Diagnostics to alert the user when the electrode needs cleaning
• User selectable “out of calibration range” warning
• User selectable “calibration timeout” to remind when a new calibration is necessary
• Extended temperature range on EC channel from –20 to 120 ºC (–4 to 248 ºF), using a temperature sensor inside the EC probe
• Temperature compensation selection
• Temperature reference selection 15 °C, 20 °C or 25 °C.
• Temperature coefficient set
• Lock and user setup fixed range selection
Other features include:
• Log on demand up to 400 samples
• Log interval with log on stability feature up to 600 records
• Auto HOLD feature, to freeze first stable reading on the LCD
• GLP feature, to view last calibration data for pH, rel mV, ISE, EC or NaCl
• PC interface
Order Information:
it is supplied with conductivity/TDS probe, pH electrode, temperature probe, pH 4.01 buffer solution sachet, pH 7.01 buffer solution sachet, electrode cleaning solution sachet (2), electrolyte solution (30 mL), electrode holder, 12 VDC adapter and instructions.
• Specifications
• Accessories
pH Range -2.0 to 20.0; -2.00 to 20.00; -2.000 to 20.000 pH
pH Resolution 000.1 pH; 0.01 pH; 0.001 pH
pH Accuracy ±0.01 pH; ±0.002 pH
mV Range ±2000.0 mV
mV Resolution 0.1 mV
mV Accuracy ±0.2 mV
ISE Range 1.00 e-7 to 9.99 e10 conc.
ISE Resolution 3 digits 0.01, 0.1, 1, 10 conc.
ISE Accuracy ±0.5% of reading (monovalent ions); ±1% of reading (divalent ions)
Temperature Channel 1 Range –20.0 to 120.0 ºC (4.0 to 248.0 ºF)
Temperature Channel 1 Resolution 0.1 ºC (0.1 ºF)
Temperature Channel 1 Accuracy ±0.2 ºC (±0.4 ºF) (excluding probe error)
Relative mV Offset Range ±2000 mV
pH Calibration up to five-point calibration, 7 standard buffers available (1.68, 4.01, 6.86, 7.01, 9.18, 10.01, 12.45), and 2 custom buffers
Slope Calibration from 80 to 110%
pH Temperature Compensation manual or automatic from –20.0 to 120.0 ºC (–4.0 to 248.0 ºF)
pH Electrode Hi 1131B glass body pH electrode with BnC connector and 1 m (3.3') cable (included)
Temperature probe Hi 7662-t temperature probe with 1 m (3.3') cable (included)
ISE Calibration up to five-point calibration points 6 standard solutions available (0.1, 1, 10, 100, 1000, 10000 ppm)
EC Range 000 to 400 ms/cm (shows values up to 1000 ms/cm) actual conductivity 1000 ms/cm; 0.001 to 9.999 µs/cm; 10.00 to 99.99 µs/cm; 100.0 to 999.9 µs/cm; 1.000 to 9.999 ms/cm; 10.00 to 99.99 ms/cm; 100.0 to 999.9 ms/cm; 1000 ms/cm (autoranging)
EC Resolution 0.001 µs/cm; 0.01 µs/cm; 0.1 µs/cm; 0.001 ms/cm; 0.01 ms/cm; 0.1 ms/cm; 1 ms/cm
EC Accuracy ±1% of reading (±0.01 µs/cm or 1 digit whichever is greater) excluding probe error
Resistivity Range 01.0 to 199.9 ohms; 100 to 1.999 ohms; 1.00 to 19.99 Kohms; 10.0 to 199.9 Kohms; 100 to 1.999 Kohms; 1.00 to 19.99 Mohms; 10.0 to 100.0 Mohms (autoranging)
Resistivity Resolution 0.1 ohm; 1 ohm; 0.01 Kohms; 0.1 Kohms; 1 Kohms; 0.01 Mohms; 0.1 Mohms
Resistivity Accuracy ±1% of reading (±10 ohms or 1 digit whichever greater) excluding probe error
TDS Range 0.000 to 9.999 ppm; 10.00 to 99.99 ppm; 100.0 to 999.9 ppm; 1.000 to 9.999 g/L; 10.00 to 99.99 g/L; 100.0 to 400.0 g/L (autoranging)
TDS Resolution 0.001 ppm; 0.01 ppm; 0.1 ppm; 0.001 g/L; 0.01 g/L; 0.1 g/L
TDS Accuracy ±1% of reading (±0.05 ppm or 1 digit whichever greater) excluding probe error
TDS Factor 0.40 to 1.00
Salinity Range % naCl: 0.0 to 400.0 %
Salinity Resolution 0.1 %
Salinity Accuracy ±1% of reading excluding probe error
Temperature Channel 2 Range -20.0 to 120°C
Temperature Channel 2 Resolution 0.1°C
Temperature Channel 2 Accuracy ±0.2 °C (excluding probe error)
EC Calibration automatic up to 2 points with 7 memorized standards (0.00 µs/cm, 84.0 µs/cm, 1.413 ms/cm, 5.00 ms/cm, 12.88 ms/cm, 80.0 ms/cm, 111.8 ms/cm)
Constant Cell Setup 0.010 to 10.000
NaCl Calibration max. 1 point only (with Hi 7073 standard)
EC Probe Hi 76310 platinum 4-ring conductivity/tDs probe with 1 m (3.3') cable (included)
Temperature Source automatic from sensor inside the probe; manual entry
EC Temperature Compensation NoTC, MTC, ATC
Reference Temperature 15, 20, 25 °C
Temperature Coeficient 0.00 to 10.00 %/°C
Log On Demand 400 samples
Lot Logging pH electrode and buffer condition
PC interface opto-isolated UsB
Input Impedance 1012 ohms
Power Supply 12 VDC adapter (included)
Environment 0 to 50 °C (32 - 122 °F) RH max 55% non-condensing
Dimensions 235 x 207 x 110 mm (9.2 x 8.14 x 4.33”)
Weight 1.8 Kg (4.1 lbs.)
الرجوع الى أعلى الصفحة اذهب الى الأسفل
معاينة صفحة البيانات الشخصي للعضو http://technolabelbahaagp.googoolz.com
Admin
Admin
avatar

عدد المساهمات : 3567
تاريخ التسجيل : 15/09/2009
العمر : 49
الموقع : مصر

مُساهمةموضوع: جهاز قياس الخواص الطبيعية للمياه الثابت والمحمول2   الجمعة يناير 07, 2011 3:57 pm

Multiparameter Water Quality Portable Meter
The Multiparameter Portable Meter is a comprehensive analytical instrument, capable of measuring up to 13 critical water quality parameters (6 measured and 7 calculated), including pH, EC/TDS, ORP, DO, atmospheric pressure, and temperature. Some of the most advanced capabilities available are incorporated into this portable meter.
Designed for intuitive operation, the menu-driven navigation is user-friendly and logical. A backlit 128 x 64 pixels graphic LCD, that automatically sizes the digits, allows full configuration of each measured parameter, displays on-screen graphing and has options for units and language selections, provides high-quality resolution and sophistication that is unsurpassed in its class.
Engineered with smart features such as auto recognition of pH/ORP probe, auto-ranging adjustments for EC/TDS readings, and measurement check - to eliminate erroneous readings - and more, our design actually simplifies operations and handling.
There is virtually no learning curve to getting into this meter and quickly mastering it's capabilities.
Each parameter is fully supported by the on-screen contextual HELP function, which is active during measurement and calibration modes. For field applications, Hanna's Quick Calibration allows the user to standardize pH, conductivity and dissolved oxygen, all with one solution! While in calibration mode, the meter will also assess and verify probe functionality.
For monitoring and recording data, HI 9828 can be equipped with the optional T.I.S. - Tag Identification System: iButton©s with unique ID numbers.
Installed at any sampling site, these tags will record and match specific location information with logging data. Comprehensive GLP features, such as last calibration date and status information, calibration time-out, and date and time tags associated with sample measurements, ensure consistency and accountability.
The LOGGER function memorizes data from each connected sensors and log-on-demand & automatic logging can record up to 60,000 data samples. All data is downloadable to a PC via USB connectivity.
it is designed for demanding outdoor environments.
The meter is impact resistant and waterproof to IP67 standards (30 minutes immersion under 1 m of water), and the multi-sensor probe, HI 769828, with an IP68 rating, can be left underwater for an extended period of time.
This intelligent probe contains a built-in microprocessor with amplifiers, interprets the high impedance signals from each sensor and sends the converted data to the meter.
Consequently, common tolerance issues associated with high impedance signals, such as limiting cable length, and noise interferences are eliminated. The probe maintains reliable communication with the meter, and the user is warned of any problems, such as a broken cable line.
Five out of six measured parameters are housed in the probe: pH/pH mV, ORP, EC, % saturation and mg/L (ppm) oxygen and temperature.
Each sensor is independently replaceable, and easy to maintain & clean.
The sensors are protected by a rugged outer PVC/stainless steel sleeve, the design of which is suited for use in 2" wells.
The intact probe housing is rated to IP68. Standard cable lengths are 4, 10 and 20 meters and custom lengths are available upon request.
The galvanic DO sensor has a built-in thermistor to provide fast temperature corrected readings.
Of course, there is no polarization time for this sensor, so it is ready for measurement at a moment's notice.
For EC, a 4-ring conductivity system ensures stable readings that are immune to polarization and the buffering effect of surface coating. Absolute conductivity, temperature corrected conductivity, salinity, specific gravity and TDS determinations are possible with measurements from this sensor.
The meter automatically recognizes the presence of either the pH or pH/ORP sensor. Both sensors have a cloth junction which allows greater sensitivity, and are gel-filled for improved resistance to contamination.
The meter also displays pH/mV readings, ideal for trouble-shooting. It accepts both alkaline and rechargeable batteries and can be recharged in the field via the 12V car accessory outlet adapter, included.
Order Information:

it is supplied with multisensor probe (pH/ORP, EC, DO, temperaure), quick calibration standard solution (500 mL), probe maintenance kit, rechargeable C size Ni-MH batteries (4), power adapter & cable, car 12V accessory outlet adapter, USB interface cable, Windows® compatible software and instruction manual in a rugged carrying case.
• Specifications
• MSDS
• Accessories
• Downloads
Range pH 0.00 to 14.00 pH
Resolution pH 0.01 pH
Accuracy pH ±0.02 pH
Range mV ±600.0 mV
Resolution mV 0.1 mV
Accuracy mV ±0.5 mV
Range mV ±2000.0 mV
Resolution mV 0.1 mV
Accuracy mV ±1.0 mV
Range DO 0.0 to 500.0%; 0.00 to 50.00 mg/L
Resolution DO 0.1% / 0.01 mg/L
Accuracy DO 0.0 to 300.0%: ±1.5% of reading or ±1.0% whichever is greater; 300.0 to 500.0%: ±3% of reading; 0.00 to 30.00 mg/L: ±1.5% of reading or 0.10 mg/L whichever is greater; 30.00 mg/L to 50.00 mg/L: ±3% of reading
Range EC 0.000 to 200.000 mS/cm (actual EC up to 400 mS/cm)
Resolution EC Manual: 1 μS/cm; 0.001 mS/cm; 0.01 mS/cm; 0.1 mS/cm; 1 mS/cm Automatic: 1 μS/cm from 0 to 9999 μS/cm; 0.01 mS/cm from 10.00 to 99.99 mS/cm ; 0.1 mS/cm from 100.0 to 400.0 mS/cm Automatic mS/cm: 0.001 mS/cm from 0.000 to 9.999 mS/cm; 0.01 mS/cm from 10.00 to 99.99 mS/cm; 0.1 mS/cm from 100.0 to 400.0 mS/cm
Accuracy EC ±1% of reading or ±1 μS/cm whichever is greater
Range Resistivity 0 to 999999 Ω•cm; 0 to 1000.0 kΩ•cm; 0 to 1.0000 MΩ•cm
Resolution Resistivity Dependent on resistivity reading
Range TDS 0 to 400000 mg/L or ppm (the maximum value depends on the TDS factor)
Resolution TDS Manual: 1 mg/L (ppm); 0.001 g/L (ppt); 0.01g/L (ppt); 0.1 g/L (ppt); 1 g/L (ppt) Auto-range scales: 1 mg/L (ppm) from 0 to 9999 mg/L (ppm); 0.01 g/L (ppt) from 10.00 to 99.99 g/L (ppt); 0.1 g/L (ppt) from 100.0 to 400.0 g/L (ppt) Auto-range g/L (ppt) scales: 0.001 g/L (ppt) from 0.000 to 9.999 g/L (ppt); 0.01 g/L (ppt) from 10.00 to 99.99 g/L (ppt); 0.1 g/L (ppt) from 100.0 to 400.0 g/L (ppt)
Accuracy TDS ±1% of reading or ±1 mg/L
Range Salinity 0.00 to 70.00 PSU (extended Practical Salinity Scale)
Resolution Salinity 0.01 PSU
Accuracy Salinity ±2% of reading or 0.01 PSU whichever is greater
Range Seawater Specific Gravity 0.0 to 50.0 σt, σ0, σ15
Resolution Seawater Specific Gravity 0.1 σt, σ0, σ15
Accuracy Seawater Specific Gravity ±1 σt, σ0, σ15
Range Atm. Pressure 450 to 850 mmHg; 17.72 to 33.46 inHg; 600.0 to 1133.2 mbar; 8.702 to 16.436 psi; 0.5921 to 1.1184 atm; 60.00 to 113.32 kPa
Resolution Atm. Pressure 0.1 mmHg; 0.01 inHg; 0.1 mbar; 0.001 psi; 0.0001 atm; 0.01 kPa
Accuracy Atm. Pressure ±3 mmHg within ±15°C from the temperature during calibration
Range Temperature -5.00 to 55.00°C; 23.00 to 131.00°F; 268.15 to 328.15K
Resolution Temperature 0.01°C; 0.01°F; 0.01K
Accuracy Temperature ±0.15°C; ±0.27°F; ±0.15K
Calibration pH Automatic 1, 2, or 3 points with 5 memorized standard buffers (pH 4.01, 6.86, 7.01, 9.18, 10.01) or 1 custom buffer
Calibration mV Automatic at 1 custom point
Calibration Conductivity, Salinity Automatic 1 point with 6 memorized standards (84 μS/cm, 1413 μS/cm, 5.00 mS/cm, 12.88 mS/cm, 80.0 mS/cm, 111.8 mS/cm) or custom point
Calibration DO Automatic 1 or 2 points at 0, 100% or 1 custom point
Calibration Resistivity, TDS Based on conductivity or salinity calibration
Calibration Atm. Pressure Automatic at 1 custom point
Calibration Temperature Automatic at 1 custom point
Temperature Compensation Automatic from -5 to 55°C (23 to 131°F)
Logging Memory Up to 60000 samples with 13 measurements each
Logging Interval 1 second to 3 hours
PC Connection USB (with HI 92000 software)
Waterproof Protection Meter IP67, Probe IP68
Environment 0 to 50°C (32 to 122°F); RH 100%
Power Supply (4) 1.5V alkaline C cells (approx. 150 hours of continuous use without backlight)/ (4) 1.2V rechargeable C cells (approx. 70 hours of continuous use without backlight)
Dimensions Meter: 221 x 115 x 55 mm (8.7 x 4.5 x 2.2”); Probe: 270 x 46 mm DIA (10.6 x 1.8” DIA)
Weight Meter: 750g (26.5 oz.); Probe: 750g (26.5 oz.)
الرجوع الى أعلى الصفحة اذهب الى الأسفل
معاينة صفحة البيانات الشخصي للعضو http://technolabelbahaagp.googoolz.com
 
جهاز قياس الخواص الطبيعية للمياه الثابت والمحمول1
استعرض الموضوع السابق استعرض الموضوع التالي الرجوع الى أعلى الصفحة 
صفحة 1 من اصل 1

صلاحيات هذا المنتدى:لاتستطيع الرد على المواضيع في هذا المنتدى
مجموعة تكنولاب البهاء جروب :: قسم معالجة وتنقية وتحاليل المياه :: التحاليل الطبية والكيميائية وتحاليل المياه-
انتقل الى: